Danfoss MBD 1000 provides you with a simple and effective solution for local monitoring of actual pressure and temperature.
A microprocessor controlled plug-in display that can be universally applied to all MBS, AKS and MBT transmitters with a 4-20 mA output and DIN 43650 plug.
The MBD 1000 is simply inserted between the transmitter and its connector by means of the integral DIN cubic plug adaptor.
- No need for auxiliary voltage source
- Simple to attach and adjust
Features
• Polarity protected
• No auxiliary energy source required
• Can be tilted to any position
• High accuracy and minimal temperature drift
• Easy installation
• Instant monitoring of transmitter
• CE approved
Technical data
Input signal: 4 - 20 mA (2-wire)
Max. allowed input current: 40 mA
Reverse voltage protection: Polarized installation
Voltage drop: Approx. 3 V
Display: 10 mm high LCD-display
Display range: Start and end value freely programmable
Maximum display value: 9999
Minimum display value: -1999
Decimal point: Any position
Measuring accuracy: 0.2% ± 1 digit
Temperature drift: 100 ppm / °C
Measuring interval: Approx. 3 measurements / sec.
Filtering: Selectable in 3 stages
Nominal temperature: 25°C
Ambient temperature: 0 to 50°C
Humidity: 0 to 80% RH (non condensing)
Electromagnetic compatibility: According to EN61000-6-2 and EN61000-6-3
additional error: < 1%
Housing Dimensions: ABS. Front screen made of polycarbonate 48.5 x 48.5 x 35.5 mm (L x W x D)
Connection: DIN 43650 adaptor
IP rating: IP65
Danfoss Plug-in display, type MBD 1000 for pressure/temperature transmitters with output 4-20 mA | |
Code no. | Type |
060G2850 | MBD 1000 |