Solenoid valves for combustion system pilot, main line fuel shut-off & control.
This range of high quality single stage gas valves is suitable for use in the most strenuous of applications. All valves are tested and certified to the European Standard ENE161 as Class /lA/I. The valves have the additional benefit of being rated to IP65 thus allowing their use in dirty and wet environments. All valves are fitted with an internal strainer to prevent the ingress of foreign matter.
Combustible Gas EN161 Asco Solenoid Valves and Externally Operated Valves
Asco 2/2 Brass Direct Acting Gas EN161 Solenoid Valve - 030
Function:Nc
Pipe Size:3/8 - 1/2
Maximum Pressure:0.48 Bar
Minimum Temperature oC:0
Maximum Temperature oC:+60
Asco 2/2 Aluminium Direct Acting Gas EN161 Solenoid Valve - 040
Function:NC
Pipe Size:3/8 - 1.1/2
Maximum Pressure:0.14 Bar
Minimum Temperature oC:0
Maximum Temperature oC:+60
Asco 2/2 Bronze / Stainless Steel Gas EN161 Externally Operated Valve - E290 EN161
Function:NC Entry Above Disc
Pipe Size:1/2 - 2
Maximum Pressure:0 To 10 Bar
Minimum Temperature oC:-10
Maximum Temperature oC:+60
MADAS is a company that produces safety and regulation devices for gas
EVO DN10 - DN15 Gas Solenoid Valve
Gas safety normally closed solenoid valve that open automatically when the coil is powered and close automatically when there is no tension. These solenoid valves are controlled by electronic gas detectors, pressure switch, thermostat, etc.
EVO Gas Solenoid Valves - EVO
Use: Not aggressive gases of the 3 families (dry gases)
Threaded connections Rp (brass body): (DN 10 ÷ DN 20) according to EN 10226
Power supply voltage: 12 Vdc, 12 V/50 Hz, 24 Vdc, 24 V/50 Hz, 110 V/50 Hz, 230 V/50-60 Hz
Power supply voltage tolerance: -15% ... +10%
Max. working pressure: 200 mbar
Environment temperature: -15 ÷ +60 °C
Max superfi cial temperature: 75 °C
Protection degree: IP65
Class: A
Group: 2
Closing time: <1 s
Opening time: <1 s
Coils: poliammidic resin encapsulated with glass fibre, connection type DIN 43650; the insulation class is F (155°) and the enamelled copper wire class is H (180°).
EVP DN20 - DN100 Gas Solenoid Valve
The solenoid valves model EVP/NC are gas interception automatic normally closed solenoid valves that open when the coil is powered and close when there is no tension. These solenoid valves can be controlled by pressure switch, thermostat, etc. They can be equipped of a flow regulator (model EVPF/NC).
EVP Gas Solenoid Valves - EVP
Use: Not aggressive gases of the 3 families (dry gases)
Threaded connections Rp: (DN 15 ÷ DN 50) according to EN 10226
Flanged connections PN 16: (DN 65 ÷ DN 100) according to ISO 7005
Power supply voltage (DN 15 ÷ DN 25): 12 Vdc, 12 V/50 Hz, 24 Vdc, 24 V/50 Hz, 110 V/50 Hz, 230 V/50-60 Hz
Power supply voltage (DN 32 ÷ DN 100): 24 Vdc, 24 V/50 Hz, 110 V/50 Hz, 230 V/50-60 Hz
Power supply voltage tolerance: -15% ... +10%
Max. working pressure: 360 mbar
Environment temperature: -15 ÷ +60 °C
Max superfi cial temperature: 85 °C
Protection degree: IP65
Class: A
Group: 2
Closing time: <1 s
Opening time: <1 s
* All versions (DN 32 ÷ DN 100) apart from the ones powered at 24 Vdc are equipped by an “Energy saving” circuit that after about 30-40 seconds reduces a lot the valve absorption.
For technical details and the complete range of Asco gas valves - Click Here
For technical details on Madas gas valves - Click Here